Vacuum packaging machine has always been a good helper for food packaging. The quality of food is mainly due to the good and bad of vacuum packaging machine. However, even the best vacuum packaging machine will have a small failure after many times of use, so it faces below. The failure, I hope not to be surprised, don't panic, follow the steps below to operate!
Closing does not work
1, vacuum pump motor reversal
2, the micro switch does not touch
3. Poor contact in the power socket
4, the voltage is insufficient
5, vacuum table pumping time is set at zero
1. Change any two of the three-phase power cables
2, adjust the switch pick
3, plug in the socket
4, make the voltage reach the standard
5, the adjustment knob gives the pumping time
Power light is not lit
1. Poor contact of the power switch
2, the indicator light is broken
3, the fuse is blown
1, replace the power switch
2, replace the indicator
3, replace the fuse
Pump does not pump vacuum
1, the studio is not tight
2, motor reversal
3, the gas path is impassable
4, the solenoid valve does not work
1, the studio is tight
2. Change any two of the three-phase power cables
3, check the gas path and repair
4. Check the solenoid valve and repair or replace it.
If the original article is reproduced, please indicate the source!
, aluminum plastic packaging machine, double aluminum packaging machine, small aluminum plastic packaging machine,
Green Beans,Delicious Green Bean,Canned Green Bean,Green String Beans
COFCO HEBEI INTERNATIONAL TRADING CO., LTD. , https://www.cofcohb.com