When you picture worktables, dish tables, or hand sinks, the edges might not be the first thing that comes to mind. But the edges are just as crucial as the main structure of the product itself. In fact, the right edge can make all the difference when it comes to maintaining cleanliness and hygiene in your facility. Here's why:
In this article, we'll explore the three different edge types that IMC uses on worktables, dish tables, and hand sinks—going over their uses and providing examples along the way. By the end, we'll answer the pressing question: "Is one edge type better than the others?" Let's dive in.
Not All Edges Are Created Equal
When it comes to edging, it's essential to consider the specific application. Some edges work better in certain situations than others. We'll delve deeper into this later in the article. For now, let's take a closer look at each edge type:
A. Flat/Square Edge
The flat or square edge might be the simplest to understand. It's the most cost-effective option when it comes to edging.
This edge provides a uniform and clean appearance, but it doesn't offer much resistance against spills, which can end up on your floor instead. That said, arranging multiple products together in your workspace is easy thanks to the uniform sides.
Flat edging is considered the "standard" type when it comes to edges and will get the job done in most applications. Flat/Square edging is standard on the following IMC products:
• All Worktables
• All Base Cabinets
• All Countertops
• Model #WS-CK Corner Hand Sink
Here are a few examples:
[Insert Image]
B. Marine Edge
Also known as "no-drip" edges, marine edges are designed to keep light to moderate amounts of water from spilling onto your floor.
These edges have a slight elevation around the perimeter of the product, which helps keep liquids securely on the surface for easier cleanup later.
Overall, the edge remains trendy and pairs well with commercial kitchen appliances. Chefs can benefit greatly from this edge design.
Marine edging is standard on the following IMC products:
• All Wall-Mounted and Free-Standing Hand Sinks (except WS-CK Corner Hand Sink)
• Model #MSK Portable Soak Sink
Here are a few examples:
[Insert Image]
C. Raised Rolled Edge
The tallest edge we manufacture is called the raised rolled edge. Compared to marine edges, the elevation here is much more pronounced.
These edges are designed to prevent virtually all liquids from landing on your floor. They're most commonly found in compartment sinks and dish tables where water is constantly being used.
Raised rolled edges remain soft, so they're still practical for completing your tasks, but the raised composition can take some getting used to for your employees.
Raised rolled edging is standard on the following IMC products:
• All Compartment/Scullery Sinks
• Model #WSMS Multi-Station Hand Sink
• Model #SCB Service Sink
Here are a few examples:
[Insert Image]
So, Which One Is the Best?
Now that you’re familiar with the different edge designs, the big question remains: "Which one is best for me?"
The truth is, all three edge designs have their own advantages, but it ultimately depends on your specific application. If you work in an environment where liquids are minimal, flat/square edging could suffice. It's also the least expensive option.
If you experience light to medium levels of spills and prefer a slightly more elegant design, a marine edge would be suitable. However, if you deal with heavy amounts of liquid, a raised rolled edge is essential. Always aim to choose the best configuration of edges to ensure safety and maintain productivity.
IMC/Teddy can customize most of the products mentioned above to include different edging if desired. We remain flexible and want to provide you with a final product that meets your specific needs. To learn more about how IMC can cater to your stainless steel requirements, click here.
*Disclaimer: The views and opinions expressed in this article are those of IMC/Teddy. Our content is intended for informational purposes only. Please contact IMC/Teddy directly if you'd like to feature this post on your webpage. Thank you.
[Social Sharing Buttons]
I hope this article has been helpful in understanding the importance of edges in your workspace. If you have any questions or need further assistance, feel free to reach out!
Thickening Agent, also known as rheological modifier/shaping agent/texture shaping agent/gelling agent/binder, is a new type of functional polymer material that has rapidly developed in recent years. It can improve the viscosity of the system and keep it in a uniform and stable suspended or cloudy state. Meanwhile, most thickeners also have emulsifying properties, which can alter the fluidity and texture of the product, making it easier to use and apply, and providing better stability.
Xanthan Gum In Skin Care, Xanthan Gum For Food, Xanthan Gum In Cosmetics
Xi'an Hersoncare Bio-Tech Co., Ltd , https://www.hersoncarebio.com