After starting the machine, once the standby unit reaches normal operating conditions, it is permissible to feed the crop in a uniform and continuous manner. Ensure that the feeding process is steady and consistent to avoid overloading the system.
While the machine is running, always monitor the motor's performance, the speed of the threshing mechanism, any unusual noises, and the temperature of the bearings. Any abnormal sounds or excessive heat could indicate potential issues that need immediate attention.
When feeding the crop into the machine, the operator should always stand on the side of the feeding port for safety. Make sure that clothing sleeves are securely fastened, and wear a mask and a work cap to protect against dust and debris.
During the feeding process, carefully inspect the grain for any foreign objects such as stones, metal tools, screws, or other hard materials. These can cause serious damage to the machine and may lead to personal injury if not removed before processing.
Never attempt to adjust the belt, lubricate the machine, clean it, or perform any troubleshooting while the machine is in operation. Such actions should only be carried out when the machine is completely stopped and disconnected from power.
If any of the following issues occur, immediately stop the engine and halt the processing:
- The motor emits smoke
- There is a blockage in the system
- The threshing quality is poor
- The bearing temperature exceeds 60 degrees Celsius
Regular maintenance and careful observation during operation are essential for both the longevity of the equipment and the safety of the operators. Always follow the manufacturer’s guidelines and ensure that all safety protocols are strictly adhered to.
5 Inch Biometric Tablet,Sim Card Fingerprint Tablet,Wireless 4G Tablet With Barcode Scanner,Fingerprint Scanner Rugged Tablet
Shenzhen Bio Technology Co., Ltd , https://www.huifantech.com