1. After starting, once the standby machine reaches normal operating conditions, it is permissible to feed the crop evenly and continuously. Ensure that the feeding process is smooth and consistent to maintain efficiency and prevent mechanical stress.
2. Always monitor the motor's performance, the threshing machine's speed, any unusual noises, and the temperature of the bearings. If any abnormal sounds or excessive heat are detected, stop the machine immediately for inspection.
3. When feeding the machine, the operator should stand on the side of the feeding port for safety. Make sure sleeves are securely fastened, and always wear a mask and work cap to protect against dust and debris.
4. While feeding, carefully inspect the grain for any foreign objects such as stones, metal tools, screws, or other hard materials. These can cause serious damage to the machine and pose a risk of injury to the operator.
5. Never attempt to adjust the belt, oil the machine, clean it, or perform any troubleshooting while the machine is running. Always turn off the engine and wait for it to fully stop before performing any maintenance or adjustments.
6. If any of the following issues occur, immediately shut down the machine and stop processing:
- Motor emitting smoke
- Machine jamming or clogging
- Poor threshing quality
- Bearings overheating (temperature exceeding 60°C)
By following these guidelines, you ensure safe and efficient operation of the threshing machine, reduce the risk of equipment failure, and protect yourself from potential hazards. Always stay alert and maintain proper working conditions during the entire process.
7 Inch Biometric Tablet,7'' Android Biometrics Fingerprint Tablet,7-Inch Rugged Industrial Tablet,7'' Android Fingerprint Rfid Tablet
Shenzhen Bio Technology Co., Ltd , https://www.huifantech.com