Medical device packaging sealing introduction

Medical device packaging sealing introduction

Labthink is an excellent provider of inspection instruments and inspection services for many years, including medical and medical, food, daily chemical, packaging, printing, adhesives, automotive, petrochemical, environmental, biological, new energy, construction, aviation and electronics. The domain customers provide excellent and quality control solutions from Zui.

Medical device packaging testing projects mainly include: barrier performance testing (gas permeability test and water vapor transmission test), friction coefficient (material surface slip performance), tensile strength and elongation, peel strength, heat seal strength (heat sealing) Strength), sealing and leak detection, tear resistance, print quality inspection, etc. Labthink (Jinan Languang Electromechanical Technology Co., Ltd.) combines the needs of medical device packaging manufacturers, and specializes in the sealing of medical device packaging as follows, with a view to helping the quality inspection of medical device packaging and sealing enterprises.

A medical device packaging barrier performance test

The barrier property of medical device packaging refers to the barrier effect of packaging materials on permeates such as gases (such as oxygen) and liquids (water vapor). Barrier performance is an important factor affecting the quality of a product during shelf life. The instrument information list is as follows:

1, PERME-DM2/330 double-detection gas permeability tester: differential pressure and equal pressure double test for plastic film, composite film and other film, sheet material and finished container gas permeability test. Three-chamber independent, automatic, temperature control, arbitrary temperature data fitting, support LAN data centralized management, patented products.

2, PERME-OX2/230 Oxygen Transmission Rate Test System: Coulomb principle, isobaric test of the oxygen permeability of film, sheet material and packaging containers such as bottles, bags, cans and boxes. Host and satellite mode, one host can be connected to nine satellites, and 30 samples can be tested simultaneously.

3, VAC-V series differential pressure gas permeation instrument is used for the measurement of the gas permeation amount of O2, N2 and CO2 in plastic film, sheet, composite film and other materials. The principle of differential pressure method. This series has VAC-V1, VAC-V2, VAC-V3 and other models.

4, PERME-W3/330 Water Vapor Transmission Rate Test System: For the determination of water vapor transmission rate of films, sheet materials and packaging containers such as bottles, bags, cans and boxes. Host and satellite mode, one host can be connected to nine satellites, and 30 samples can be tested simultaneously.

5, TSY-T series moisture permeability tester: test of water vapor transmission rate of various packaging materials and polymer products such as film and composite film; temperature control, automatic control; computer monitoring and weight method. This series has TSY-T1H, TSY-T1L, TSY-T3 and other models.

Second, medical equipment packaging strength testing

Medical device packaging strength testing includes packaging material tensile strength, composite film peel strength, heat seal strength, tear strength, puncture strength and other indicators. Tensile strength means that the material is subjected to a large stress value of zui before being broken. The detection can effectively solve the damage and breakage of the package caused by the external force due to insufficient mechanical strength of the selected packaging material. The peel strength is also referred to as composite strength, and is a joint strength between layers and layers in the composite film. If the adhesive strength is too low, problems such as leakage due to interlayer separation during packaging use are extremely likely to occur. The heat seal strength is the strength of the seal. During the storage and transportation of the product, once the heat seal strength is too low, the heat seal is cracked and the contents are leaked. Puncture resistance is an indicator of the ability of a package to resist the penetration of hard objects.

The corresponding test instrument information is as follows:

1, XLW series intelligent electronic tensile testing machine: film, composite film, adhesive, adhesive tape and other peeling, tensile test, heat sealing strength test, professional test of tear performance. The series has XLW, XLW (B), XLW (M), XLW (PC), XLW (G) and other models.

2, BLD-200S electronic peeling test machine: peeling, tensile test, heat sealing strength test of film, composite film, adhesive, adhesive tape, etc.; standard specification 200N (100N, 50N, 30N), micro-play, computer communication interface.

3, HST-H3 heat seal tester: sample preparation for film heat seal strength test, pressure, temperature, time adjustable. It adopts single-chip control and intelligent operation; the temperature adopts PID high-precision components to ensure accurate and reliable temperature.

4, RTD-R2 heat sealing gradiometer: It can prepare samples of plastic film, flexible packaging composite film and other materials at 5 sets of independent temperature at one time, and heat-sealed five sets of samples at a time, high efficiency.

Third, medical device packaging sealing performance test

The sealing performance test of the medical device packaging can ensure that the sealing of the entire product package is intact, and the leakage of the package is prevented due to the poor sealing performance of the product.

1, MFY-01 Seal Tester: Vacuum chamber vacuum is used for packaging seal reliability test. Microcomputer control, panel operation, digital setting test parameters, fully automatic test

2, LSSD-0 leakage and seal strength tester: packaging bag, plastic bottle, packaging container heat seal strength and seal integrity test, test process intelligent, liquid crystal display, statistical communication; positive pressure principle

Fourth, medical device packaging top air body analysis

HGA-01 top air analyzer is used for the determination of oxygen, carbon dioxide gas content and mixing ratio in sealed packaging bags, bottles, cans, etc. It is suitable for fast and accurate in the packaging line in warehouses, warehouses, laboratories, etc. The content and proportion of the gas components are evaluated to guide production and ensure that the shelf life of the product is achieved.

V. Medical device packaging impact resistance test

Test the impact resistance of medical device packaging to ensure that the selected packaging material is effective in protecting the product. The impact resistance test has two test methods: dart impact and pendulum impact.

BMC-B1 Dart Impact Tester: A free dart test method for determining the impact mass and energy of a damaged or damaged plastic film or sheet at a given height.

FIT-01 film impact tester for the determination of impact resistance of plastic film, sheet, composite film, aluminum foil, etc. The hemispherical punch of the film impact tester impacts at a certain speed and passes through the film sample, measuring the punch The energy consumed is used to evaluate the anti-pendulum impact capability of the film.

Sixth, medical device packaging tear performance test:

The packaging of medical device packaging during storage and transportation may be torn by external force, and sufficient tear propagation resistance can reduce tear transmission and avoid packaging leakage.

SLY-S1 Tear Tester: Elemendorf method for tear resistance testing of films, sheets, paper, cardboard, and other materials.

Seven, medical device packaging friction coefficient (surface slippery)

The inner and outer surfaces of the {Keyword Part Field Call} should have appropriate slip properties to ensure good openness and smooth transport and packaging on high speed production lines.

1, MXD series friction coefficient meter: It is suitable for measuring the static friction coefficient and dynamic friction coefficient of plastic film and sheet, paper and other materials when sliding. By measuring the slipperiness of the material, it is possible to control the production quality process indexes such as adjusting the opening property of the packaging bag and the packaging speed of the packaging machine to meet the product use requirements. The series has three products: MXD-01, MXD-01A and MXD-02.

2, FTP-F1 friction coefficient / peel tester: computer control, can test the material friction coefficient from room temperature to 99.9 degrees, and can also test the composite film, adhesive products at very warm peel strength test.

Eight, medical device packaging thickness measurement

Thickness is the basic indicator for detecting films. Uneven thickness will not only affect the tensile strength and barrier properties of the film, but also affect the subsequent processing of the film.

1, CHY-C2 thickness gauge: used to measure film, sheet, paper thickness. Mechanical contact measurement method, not subject to measurement materials; imported high quality sensor, measurement resolution up to 0.1 micron; measuring head to film (paper) contact Area and contact pressure strictly comply with relevant standards; compatible with ISO, ASTM and other measurement standards.

2, CHY-CA thickness gauge: 0.1um high-precision, multi-point automatic continuous measurement, liquid crystal display, micro-play, statistics, communication.

Nine, medical equipment packaging and printing quality testing equipment

1. Printing ink layer bonding fastness: YGJ-02 adhesive tape rolling machine and BLJ-02 disc peeling test machine, used in combination with two machines, suitable for printing printing on plastic film and cellophane decorative prints (including composite film prints) Test test for layer bonding fastness. It is also used for the test test of the adhesion state of the surface layer formed by vacuum coating, surface coating, composite and other related processes.

2. MCJ-01A friction tester: It is suitable for the test test of the abrasion resistance of printed ink layer, the abrasion resistance of PS plate photosensitive layer and the abrasion resistance of surface coating of related products. Effectively analyze the problems of poor rub resistance of the printed matter, falling off of the ink layer, low printing durability of the PS plate, and poor coating hardness of other products.

3, RT-01 friction tester: printing ink layer wear resistance test. Arc motion mode; dual-station symmetrical design, high test efficiency, in line with international standards such as ASTM, TAPPI

For more information, please call, trade4@

This information was published by Jinan Languang Electromechanical Technology Co., Ltd.: Tian Xiaochuan ().

Homecare Devices

Home Care Devices,Household Standby Medical Devices,Home Medical Equipment,Home Medical Services

Surgimed Medical Supplies Co.,Ltd , https://www.surgimedcn.com