1, hand cranking. When cranking the crankshaft under the pressure of the engine, the upward resistance of the piston gradually increases. When the resistance is maximum, the crankshaft is stopped. At this time, if the gripping force of the gripper is felt to be large, the compressive force is good, and vice versa. For multi-cylinder engines, the compression force of each cylinder can also be checked separately according to its operating sequence.
2, smoking method. When the engine is working, open the oil-filled mouth cover. If there is a stock of black smoke coming out of it, the gap between the cylinder wall and the piston ring is excessive due to wear, and the compression force of the air cylinder is not good.
New Grip is those grips new arrival or design by us,such as our original design Hummingbird Tattoo Grips.
Grips can be made of materials like stainless steel, plastic, aluminium, silicon, etc. Tattoo grips are used in together with
tube stems to form the grip that you hold a Tattoo Machine with. Stainless Steel Tattoo Grips require an autoclave to
properly sterilize. A barrier method to keep the tattoo grip clean like a tattoo machine bag can be used, however, it
is still necessary to properly sterilize all grips & tubes and needles via an autoclave if the intention is to reuse these products.
Magnum Disposable Tattoo Grip,Disposable Tattoo Tubes Grips,Magnum Disposable Tattoo Grips,Magnum Disposable Tattoo Tube Grip
Redtop Tattoo Supply Co., Limited , http://www.redtop-tattoo.com