How to maintain and pay attention to industrial ice water machine protection
The chiller maintenance and maintenance can extend the service life and use effect of the industrial chiller!
1. If the chiller has been used for more than six months , the dehumidifier, or the high/low pressure switch often fails, or the cooling capacity is reduced. Please arrange for the staff to clean the condenser. If you repeatedly repair according to the above instructions, the chiller malfunction alarm still sounds, then you must ask the professional maintenance chiller to repair.
2. The set values ​​of the various protection devices of the unit have been set up by the factory, and users should not arbitrarily change them.
3. When the unit has a fault alarm and stops, first press the stop button of the unit (the alarm light will be extinguished), and then check the cause of the fault. The humidifier should not be forced to start before the fault is eliminated.
4. If it is not an emergency, the unit should not be turned off by cutting off the main power supply; if the unit is stopped for a long time in the winter, first shut down the unit, industrial chiller, then turn off the main power supply, and drain the water in the system.
5, to keep the machine room clean and well ventilated, regular cleaning and removal of the condenser to ensure normal and stable operation of the unit.
6. The water-cooled chiller should keep the heat-dissipating water tower clean, keep the air circulation around the water tower, and keep the temperature low to prevent debris from entering the cooling tower to reduce heat dissipation efficiency.
7. Air-cooled chiller should keep the surface of the chiller cooling coil clean, ensure the surrounding air circulation, low temperature, and regularly clean the scale on the coil to ensure good heat transfer.
8. The air-cooled chiller unit should be turned on to see if the fan's steering is correct. If the forward rotation can be turned on, the reverse rotation indicates that the power supply wiring is reversed, and the phase sequence must be replaced before starting.
3. When the unit has a fault alarm and stops, first press the stop button of the unit (the alarm light will be extinguished), and then check the cause of the fault. The humidifier should not be forced to start before the fault is eliminated.
4. If it is not an emergency, the unit should not be turned off by cutting off the main power supply; if the unit is stopped for a long time in the winter, first shut down the unit, industrial chiller, then turn off the main power supply, and drain the water in the system.
5, to keep the machine room clean and well ventilated, regular cleaning and removal of the condenser to ensure normal and stable operation of the unit.
6. The water-cooled chiller should keep the heat-dissipating water tower clean, keep the air circulation around the water tower, and keep the temperature low to prevent debris from entering the cooling tower to reduce heat dissipation efficiency.
7. Air-cooled chiller should keep the surface of the chiller cooling coil clean, ensure the surrounding air circulation, low temperature, and regularly clean the scale on the coil to ensure good heat transfer.
8. The air-cooled chiller unit should be turned on to see if the fan's steering is correct. If the forward rotation can be turned on, the reverse rotation indicates that the power supply wiring is reversed, and the phase sequence must be replaced before starting.
Looking at the knowledge of repair and maintenance of such a chiller, I think you should know that the chiller is specially maintained during daily use, so maintenance, so that your chiller will last longer!
ETR has independently developed an integrated vacuum pump unit composed of a water-ring vacuum pump, a gas-water separator, a vacuum solenoid valve, pipe fittings and an electrical control system. It is a simple, safe and reliable device that continuously serves the wards all day long, without occupying the ward space. The negative pressure is sourced from the vacuum pump unit.
Compacted Vacuum Suction Unit
Compacted Vacuum Suction Unit,Medical Suction Unit,Hospital Suction Unit,Hospital Suction Machine
Hunan Eter Electronic Medical Project Stock Co., Ltd. , https://www.centralgas.be