Functional use of constant temperature and humidity test chamber:
This series of products is suitable for aerospace products, information electronic instrumentation, materials, electrical, electronic products, various electronic components in the hot and humid environment, to test their performance indicators.
Temperature regulation method BTHC mode (balanced temperature adjustment mode)
Working environment temperature +5~+35 degree heater Nichrome electric heating wire heater humidifier (temperature and humidity model) shallow trough heating humidifier blower centrifugal fan temperature (humidity) sensor PT100 dry and wet bulb sensor performance temperature / humidity Range temperature: G: - 20 ~ +150 degrees; Z: -40 ~ +150 degrees; D: -70 ~ +150 degrees Humidity: 20% ~ 98% RH
Temperature fluctuation: ±0.5 degrees Humidity fluctuation: ±1% RH
Humidity uniformity: ±2 degrees heating time: -20 ~ +150 degrees less than 60 minutes; -40 ~ +150 degrees less than 70 minutes -70 ~ +150 degrees less than 90 minutes cooling time: +20 ~ -20 degrees less than 45 minutes ; +20 ~ -40 degrees less than 60 minutes; +20 ~ -70 degrees less than 80 minutes
Constant temperature and humidity test chamber product structure:
Inner and outer box material: inner box - mirror stainless steel plate; outer box - stainless steel or steel plate spray insulation material: rigid polyurethane foam + glass wool controller: P meter, Japan OYO or Korea TEMI human machine interface touch screen control Refrigeration system: France Taikang fully enclosed compressor / environmentally friendly refrigerant protection device: compressor overheating, overcurrent, overpressure, heating humidification, air combustion, tank temperature, water shortage alarm system power supply: 3ф5W380VAC±10% or 2ф3W220VAC± 10%
Standard configuration: observation window (indoor lighting), Ñ„50mm cable hole (located on the left), sample holder (set height), mobile work wheel, humidification tank option: communication interface, recorder, built-in glass Door and operating hole
Tattoo Machine Armature Bars:
Standard Armature Bars for a Liner & Shader tattoo machine are made from low carbon steel to increase magnetism.
Usually we offer 46mm Tattoo Armature Bar.
We also can produce other sizes for you.
You just need to tell us your demands.
Armature Bars
Armature Bars, Tattoo Machine Armature Bar, Tattoo Armature Bar
Paddy Irons Tattooo Factory , http://www.paddyironstattoo.com