Why the damage of the combine harvester bearing is more common? First, the combine harvester mistakenly believes that the combined harvester is installed with a sealed bearing, which does not require frequent inspection and maintenance; second, some operators are afraid of trouble, inspection and maintenance It is a trivial matter; the third reason is that the operators are eager to hurry up and take advantage of the benefits in the wheat harvest season and fail to do a good job in inspections and repairs. The operators should be made aware that only proper inspection and maintenance can be performed according to the working time and workload. Damage to bearings and other parts occurs. Why is damage to the V-belt of the combine harvester more common? The main reason is that the non-fan hand mistakenly believes that the V-belt is as tight as possible, thinking that this will not only prevent the V-belt from slipping, but also prevent blockage and Other failures occur. As everyone knows, the more tight the V-belt is, the more likely it is to wear, deform, age, or break. This not only shortens the service life of the V-belts, but also increases the load on the bearings and the shaft head, increasing the wear of the bearings and causing The shaft head is bent or deformed. The degree of tightness of the combine v-belt is determined according to its model and location. In general, it is better to loosen the v-belt without slippage.
Sony Battery,SANYO Battery,Rechageable Li Ion Battery
Shenzhen Piofond Technology Co., Ltd. , http://www.szliionbattery.com