First, the preparatory work before starting 1 First check the rice mill parts of the connection is complete; the connection screws, nuts are loose; the installation is correct. If there is a problem, the correct installation and commissioning should be performed first. 2 Remove debris (such as stones, iron, etc.) from the rice to be grinded to avoid accidents. Check whether the wet and dry level of rice satisfies the requirements, then insert the hopper plugboard tightly and put the rice into the hopper and wait. Second, the technical requirements after the boot 1 Connect the power, let the rice mill idle ll for 3 minutes, to be stable after the operation, and then slowly pull in the material feeding board for feeding, put into work. 2 Check the quality of rice at any time. If the quality does not meet the requirements, you can adjust the feeding plate or adjust the gap between the rice knife and the grinding center. Method is: If there is more valleys, adjust the discharge flap first, so that the rice outlet is properly reduced (if the rice outlet is turned down, it still contains more valleys, you must reduce the gap between the rice knife and the grinding center). If there is a lot of broken rice, you should increase the size of the rice outlet (or the gap between the rice knife and the grinding heart). 3 After the rice milling knife is used for a period of time, if there is no sharpness due to wear, the rice milling knife can be turned over and turned over. If the rice sieve leaks, you should replace it with a new one. 4 At the end of rice milling, the hopper plugs should be inserted tightly so that all the rice in the scouring stones can be grinded and discharged, and then the power is cut off. Third, the maintenance after shutdown 1 If you find the bearing housing temperature is high, it should be filled with lubricating oil (such as butter). 2 Conduct a complete and detailed inspection of the body. 3 It is forbidden for children and adults who are not familiar with the use and maintenance knowledge of rice milling machines to play rice to avoid unnecessary losses.
Laser Measuring Tape,Promotion Mini Tape ,Bmi Measur Tape
Wheelchair ramp Stethscoper Co., Ltd. , http://www.youxin-adk.com