The nine tips for emergency repairs

Traveling by car, you may suddenly start driving accidentally. If you accidentally go wrong with a car, you will certainly lose your joy of traveling. However, if you have mastered the secrets of the following nine emergency repairs, you can ensure maximum worry-free driving. A. The tubing is broken. When the tubing breaks, it can find a rubber or plastic tube that fits the diameter of the tubing. If the sleeve is not tight enough, the two ends can be tightly tied with wire to prevent oil leakage. B. The tubing ruptured. When the tubing ruptures, the cracked area can be wiped clean, coated with soap, wrapped with a piece of cloth or tape around the broken tubing, and tied with wire, then coated with soap. C. The oil pipe joint leaks. The cotton yarn can be used to wrap the lower edge of the horn, and then tighten the tubing nut and the tubing connector. You can also chews the bubble gum or maltose into a paste. Apply it to the tubing nut seat and wait for the dry condensation to seal it. . D, leakage of oil leaks. According to the size of the trachoma, use the electric fuse of the corresponding specification, and gently poke it into the trachoma with a hand hammer to eliminate oil leakage and water leakage. E. Damage to the fuel tank. When the motor vehicle is in use, it is found that the oil leakage from the fuel tank can be wiped clean, with soap or bubble gum applied to the oil spill, temporarily blocked; with epoxy resin adhesive repair, better. F, the sedimentation cup breaks. Use a tape pipe or plastic tube to put the sediment cup into and out of the tubing sleeve so that the oil does not pass through the settling cup. G. When the inlet and outlet hoses are broken. When the cracks are not large, use a cloth coated with soap to wrap the leaks. If the cracks are large, cut the hoses and put a bamboo tube or iron in the middle. Tube, and tied with wire. H. The valve spring breaks. The broken spring can be removed and the broken two sections can be reversed and used. If the spring breaks into several sections, the inlet and exhaust valve adjusting screws of the cylinder can be removed to keep the valve closed. Let the cylinder stop working. I. The fan belt breaks. The broken belt can be tied in series with a wire or the car can be driven off with a stop-and-go method.

[Eligibles]

Susceptible individuals and persons liable to be afflicted with the associated complications, such as children, elderly persons and individuals in the epidemic area.

[Function and use]

The product can induce immunity against influenza virus in recipients following immunization. It is used to prevent the infections of the prevalent strains of influenza viruses.

[Description]

The Influenza Vaccine (split virion) is a preparation made from the WHO recommended prevalent strains of influenza virus type A and type B, which are grown separately in embryonated chicken eggs. After incubation, the virus suspensions in allantoic cavities are harvested. The vaccine is prepared by inactivation, concentration, purification and disruption of the virus. It is a slightly milky-white liquid, containing thimerosal as a preservative.

Active constituent: Influenza haemagglutinin derived from each of prevalent influenza virus strains in that very year. (The name of each of virus strains and the content of haemagglutinin shall be included. )

Subsidiary materials: All the components of subsidiary materials approved shall be listed.

Influenza Vaccine-vial

Vial

Infuenza Vaccine-PFS

Pre-filled syringe



1.influenza vaccine                                                      

2.split virion                                                               

3.WHO recommended strains                                   

4.against influenza virus


Influenza Vaccine

Influenza Vaccine,Inactivated Vaccine,Flu Vaccine,Influenza Vaccine For Human

Changchun Changsheng Life Sciences Ltd. , http://www.ccls-vaccine.com