In the autumn, the temperature turns from heat to cold, and the sunshine is getting shorter. After high temperatures in midsummer, the nutrient consumption of the chicken body is very high, and the constitution is obviously reduced, and moulting and production stoppages have started. If the autumn feeding and management method focusing on forced moulting is implemented, the production efficiency of laying hens can be improved. Mandatory moulting. That is to say, artificially changing the living conditions of the flock: (1) Using methods such as limiting the amount of material, restricting water, and controlling light, etc., to promote the metabolic disorder of the flock and the malnutrition supply, so as to achieve the purpose of the simultaneous moulting of the flock, and the period of discontinued production is about two months. , you can synchronize egg production, which can increase egg production 9-12%. (2) The use of a combination of chemistry and hunger to enforce moulting is better. The method was to cut off the water and cut off the material for two and a half days. At the same time, the supplemental lighting was stopped, and then the water supply and the amount of feed were adequate. On the third day, free feeding of egg-laying chickens containing 2% of zinc sulfate began and the supplemental lighting was resumed. This will stop the moulting moult. Adjust feed nutrition. Generally, during the moulting period of chickens, it is necessary to prevent grazing when eating grazing, feathers, etc., and gradually increase the amount when feeding, and provide enough eating surface so that it can feed at the same time and avoid overeating. And partial eclipse. The calcium in the diet should be increased to 3-4%, and at the same time, sufficient vitamin B, green feed, sprouted grains, etc. should be supplied, and sufficient water should be given. After the moulting, the ratio of concentrate and protein should be increased in the diet, and about 1% of calcium sulfate powder and supplemented with high-quality concentrates can also be added. At the same time, increase the light daily to 14-16 hours, and carefully manage the flock to promote its early recovery egg production. Timely chickens. For chickens with extended useful life, diseased and low-producing chickens must be detected and eliminated during the moulting period in order to reduce feeding costs and increase production efficiency. Pay attention to health and epidemic prevention. During the moulting period, according to actual needs, such as chicken Newcastle disease, fowl cholera, chicken gizzards, infectious laryngotracheitis and other pest (bacteria) vaccine injection and insect repellent work. The walls are painted with 20% lime emulsion; walls, floors, etc. are sterilized with a 0.2-0.5% solution of peracetic acid; drinking utensils, feeding utensils, etc. are sterilized with 2-3% sura or 0.1% benzalkonium chloride. Rinse with water again and dry it; the feces will be packed and sealed for biological disinfection.
Medical Sterilizer are mainly used for rapid sterilization in operating rooms,orthopaedics,stomatology,ophthalmology,otorhinolaryngology,and laboratories,and sterilization of grease,oil yarns,etc.in the supply room
Medical sterilizer fast:5-10 minutes for the whole process,with a heat sink,which can be used again in 4-5 minutes.
Medical sterilizer convenience: Automatic control:set parameters,start the work button,and automatically complete the entire process.
Medical sterilizer In the event of a malfunction,an alarm sounds and the digital tube flashes Err to alert the operator.
There is a prompt tone at the end and no special supervision is required.
Medical sterilizer safety:Sterilization source is a light source that is harmless to human body
Medical sterilizer ultra high temperature protection system,more than 310,automatic power off to stop working.
Medical Sterilizer
Medical Sterilizer,Dental Sterilizer,Infrared Sterilizer,Hydrogen Peroxide Sterilizer
Henan Sanqiang Medical Equipment Liability Co.,Ltd , http://www.sterilizers-china.com
