After reading so many stainless steel vibrating wire customer cases, after thousands of customers in the industry actually bought and put into use, I believe that the wide application of stainless steel vibrating screen and the efficiency of efficiency have been well known, and more and more Customers and stainless steel vibrating screen manufacturers began to share online installation tips, tips and precautions about stainless steel vibrating screens. It is convenient for customers who have not used or can not use stainless steel vibrating screens. , there is a very basic but it should not be overlooked point is rarely mentioned, that is, "a stainless steel shaker should be placed in what position."
If you listen to it, you will think that I want to talk about the feng shui-related metaphysical problem. Actually, this is not the case. There are design and sciences, which are related to the service life of the stainless steel vibrating screen and the efficiency of the entire production line of the enterprise.
Since the stainless steel vibrating screen is usually used as a supporting equipment for improving the quality, it is a part of the entire production line process, so its installation position must be close to the equipment required for his upper and lower processes, but in the " stainless steel vibrating screen how can well reduce the vibration motor and control the heat, "an article we have introduced, taking into account the core power source stainless steel shaker - vibrating motor requirements of the work environment, we have integrated into the ventilation, temperature, dust density Other factors are used to arrange the position of the stainless steel vibrating screen.
It has been found that stainless steel vibrating screens are generally recommended to be placed in the high-rise building of the crushing workshop. The span is generally not less than 8m , and the production of complex and multi-variety products can be taken as 9m . The center line of the stainless steel vibrating screen and the center line of the bucket elevator are in line in the transverse direction. The spacing between them should ensure the minimum size required to install the slide tube between the bucket elevator and the stainless steel vibrating screen. The inclination angle of the slip tube is not less than 45 . In order to improve the screening efficiency, the material is covered with a sieve surface, and a material distribution plate can be arranged at the inlet of the stainless steel vibrating screen.
Stainless steel vibrating screen below the layout and process design notes:
(1) There are three types of transported coarse aggregates, ie, sieved materials :
1) directly return to the pulverizer through the slide pipe to re-grind or enter the transition powder bin of the pulverizer ;
2) feeding the pulverizer supply bin through the conveying equipment ;
3) Specially designed belt conveyor or screw conveyor to send coarse aggregates to the mill supply bin.
(2) The fine powder that is sifted out is the conveying equipment for the powder product or sent to the batching warehouse through the slip tube for use, and the facility that can be sent to the grinding machine supply bin should also be considered.
1) When the sieve is selected from the vibrating screen, the height of the center line from the floor can be equal to or slightly smaller than the width of the screen. The screen should be equipped with a shield. The structure of the dust cover must be easy to replace the screen. An access door shall be provided in front of and on both sides. When the vibrating screen adopts a large sealed dust cover, the elevation of the top is consistent with the elevation of the bucket elevator inspection platform. When the vibrating screen is inspected, the lifting parts are hung above the dust cover.
2) When there are two or more screening machines of different specifications and models in the workshop, firstly arrange according to the largest size screening machine ( with factory spacing and height from the floor ) , other screening machines are subdivided into large size sieves. For the extension, take the same center line as far as possible on the longitudinal positioning line to make the factory layout neat.
3) When arranging the bucket elevator, it should be noted that 3t manual single beam lifting equipment is arranged above the bucket elevator . The center distance between the bottom of the crane rail and the bucket wheel of the bucket elevator is not less than 1.5m , which is convenient for lifting the transmission. When the bucket elevator gear is exposed to the roof, a separate rain and rain protection shall be provided on the top of the bucket elevator.
Changhong Imp. & Exp. Co., Ltd. , http://www.ly-foods.com