3D Ultrasound Hifu Skin Tighten Wrinkle Removal Face Lift

Principle:

3D HIFU is ultrasound energy distance of width, length and depth, which more Comprehensive, three-dimensional. Directly delivers heat energy to skin and subcutaneous tissue that can stimulate and renew the skin's collagen and thus consequently improving the texture and reducing sagging of the skin.

 

Features:

No pain,more comfortable, vacuum sucking and kneading to decompose fat,the effective result is much better
 1. One shot 11 lines,one step 10MM treatment width
 2.The energy shots be more well-distributed, so treatment results will be better than others 
 3. Lift face and shape body with 8 pieces cartridges: 1.5 or 3 MM or 4.5 or 6 MM or 8 or 10 or 13 or 16MM
 4. One cartridge including 10,000 and 500lines
 5. Working temperature: 0 to 55°C
 6. Portable HIFU machine
 7. Net weight: 15kg
 8. Material: aluminum with sand-blasting
 9. 15" screen
 10. Frequency: 4MHz
 11. vacuum frequency: 1MHz

Layered energy emission transmitter of HIFU

1.Transducer DS-4.5mm, 4MHZ frequency used to transmit high- energy focused ultrasound to the skin, subcutaneous tissue, the ultrasound to penetrate the skin to a depth of 4.5mm, direct subcutaneous SMAS layer, forming "heat coagulation" regional, targeted to thicker skin, such as cheeks, etc.
2. Transducer DS-3.0mm, 4MHz frequency ,used to release ultrasound energy into the dermis layer of 3.0mm,is responsible for activating the skin's dermal layer of collagen, effectively enhance the effect of the consolidation of the outline, but also improve large pores and reduce the appearance of wrinkles.
3. Transducer DS-6.0mm,8.0mm,10mm,13mm and 16mm are responsible for transmitting 4 MHZ high intensity focused ultrasound subcutaneous fat layer to melt the fat cells. Then the metabolites of fat cells will be excreted by human body's metabolis.It is targeting the body.
Note: DS-6.0mm,8.0mm,10mm,13mm and 16mm transducer is ONLY do for body fat reduction, skin tightening.

Advantages:

1. It uses the latest advanced technology called HIFU, short for high intensity focused ultrasound.

2. It has three different working heads for different operational areas:

DS-3.0mm is for the dermis layer;

DS-4.5mm is for the SMAS layer.

DS-6.0mm/8mm/10mm13mm/16mm for body fat layer

3. It's totally non-invasive and safe.

4. The effect will be shown after the operation, while the best effect will be seen after two months. It can be lasted for 2-3 years.

Operation step of hifu:

1. Clean the Skin.
2. Take a photo before treatment , and paint on the preoperative lifting location with make up pencil .
3. According to the skin thickness to select appropriated transducer (Transmitter) .
4. Set suitable input intensity ( such as1.0-1.5J ) , focal length and spacing ( such as 1.5mm)
5. Applying ultrasonic plentiful gel as couplant between transducer and skin.
6. Face lifting operate on the note of power line, forming a line thermal condensed node in the specified depth under skin when the transmitting button is pressed per time, operating continued on the powder line until the specified location transmission is completed. The treatment parts such as face, chin and both sides of neck.
7. Don't operate on marginal mandibular nerve and supra or bital nerve.
8. No recovery period after treatment, daub some moisture product and make up immediately.
9. Only once, the comprehensive effect will gradually appear in two or three moths,Some people may do this treatments several times.

Specification: